How To Make Attic Insulation An Easy Process

Do it yourself attic insulation does not have to be a complicated process when fully prepared for the installation. For a simple insulation there are two types of insulation: batts of insulation or rolls of insulation, both typically made of fiber glass. For a professional insulation you will normally use an insulation called loose fill.

When purchasing insulation either in rolls or batts, you will find they are normally always around the same length. Rolls will normally measure between sixteen inches to twenty four inches and the batts are typically around eight feet in length.

Measure your attic before buying your insulation and by doing this you will guarantee that you will have all the necessary insulation. If your attic is already partly insulated then make sure that the insulation does not have to be changed or has been damaged in any way. Covers are also available for the top of your insulation to prevent any damage to it. Depending on the type of insulation you buy, you can choose the necessary cover for it.

The installation itself is a very simple process that can be fully completed in just a few days if done effectively and properly. Always start at one side of the attic and weigh down the joists, if they are open, with either a heavy object or your feet. Place or unroll the insulation slabs making sure they are in the joists. Knock down the ends with care so that the insulation slab will not split. Cut away any edges that overlap, using the utility knife. Make sure any wires are uncovered so that they will not short circuit in the future.

Being well prepared before commencing the installation of your attic insulation is highly recommended by experts. Make sure your body face, ayes and hands are fully covered so that the fiber glass will not touch your skin, as it can cause a bad irritation.